Technical aspects: SWISS GRIP® AntiSlip
GriP AntiSlip / SWISS GRIP® Bathroom is suitable for all kinds of shower and bathtubs. If you require anti-slip protection on other surfaces such as tiles, natural stone, glass, glass-reinforced plastic or laminate, please get in touch with us using the contact form >>.
Industrial processors who work with GriP AntiSlip / SWISS GRIP® coatings grant warranties of up to 10 years. Apart from that, the durability very much depends on external conditions and, above all, the amount of wear on the coated surface.
GriP AntiSlip / SWISS GRIP® can only be applied again when the old coating has been removed and the underlying surface has been thoroughly cleaned.
Yes, using our GriP AntiSlip / SWISS GRIP® Remover.
No, GriP AntiSlip / SWISS GRIP® merely affects the anti-slip properties of the coated surfaces. Apart from that there are no other changes.
No. In contrast to other anti-slip products, the surface is neither etched nor treated chemically.
Yes. Surfaces solely walked on with bare feet should be coated with GriP AntiSlip / SWISS GRIP® Bathroom; all other surfaces in internal spaces can be coated with GriP AntiSlip / SWISS GRIP® Floor.
Most external surfaces can be coated with GriP AntiSlip / SWISS GRIP® Floor. Please get in touch with us if you have any special requirements: Contact form >>.
10. Is GriP AntiSlip / SWISS GRIP® also suitable for surfaces that are in permanent contact with water?
We also have a solution for this. GriP AntiSlip / SWISS GRIP® Floor that can only be applied in a special process is exclusively available from us, since only our team can carry out the treatment. Please get in touch with us if you require this.
You can easily apply GriP AntiSlip / SWISS GRIP® Bathroom in your shower or bathtub yourself. The box includes everything you require. Our product video >> shows how to apply it. If you have any questions, please get in touch with us using the Contact form >>.
Yes, GriP AntiSlip / SWISS GRIP® is also suitable for external areas and is frost-proof and UV-resistant.
Once the underlying surface has been thoroughly cleaned, it takes about 15 minutes to coat a shower or bathtub. In other areas, the amount of time required very much depends on the respective conditions.
The used materials can be disposed of in the normal household waste.
No. GriP AntiSlip / SWISS GRIP® is UV-resistant.
GriP AntiSlip / SWISS GRIP® also works on black underground e.g. black tiles or tubs. However, since black as a color is inherently delicate, it should be worked very carefully. Especially fluff or other particles on the surface to be coated should be avoided at all costs. For coatings on very dark surfaces, we therefore recommend that these be applied by experienced users. See also Reference SWISS GriP coating on black and dark tiles >>.